No, Me Neither

I’ve noticed this apparition a few times recently. I’ve been out running to the east of the village and nearly fallen over past this tree. Well, it’s a mug tree, isn’t it. Any idea why?

Mug Tree
Mug Tree

I have to say that it looks a little better in the winter and the mugs stand out more, but you get the idea. How very strange, but also, quite cool. I think that one of my mugs will end up on it soon.

Mug Tree
Mug Tree

I am sure that some people could be convinced that this is a rare form of tree. One that grows mugs. Most major china exporters have more of them. Obviously.

Monster Trucks

I went to see Monster Trucks at Rochester Cineworld Cinema. It’s a kids film. I rated it (surprisingly high) on IMDB and you should read this before taking my ratings seriously.

You know what? This film was alright. It was a bit like an earthly version of Transformers. There was a young man who was obsessed with trucks but also quite intelligent and a young woman trying to impress him. I’m not really sure. There was also some step-dad stuff along the way with Danny Glover playing a scrap metal merchant in a wheelchair.

There were monsters. But, of course, they were mostly friendly. Apart from the physics of crashing down a hill and crushing your vertebrae this film was mostly good fun.

Ghost In The Shell

I went to see Ghost In The Shell this afternoon. I booked a 14:30 showing. As is custom I went to the Cineworld at Rochester. Maybe one day I’ll change my “usual”.

So, the thing with the ratings is that you should read this communication.

I enjoyed what I saw of this film and I thought it was good. I recently watched the original anime version and thought that was brilliant. I don’t care for comparing across the genres. The only film I would get touchy about is that tour de force Akira.

I did “rest my eyes” a few times during this film and so I think it would be sensible for me to go again sometime when I am feeling more awake. A short and sweet review this time!

Carterton

I recently had a day trip with the cadets to RAF Brize Norton. We visited three main areas of the base:

  • TMW – Tactical Med Wing
  • GEW – General Engineering Wing
  • 47 Sqn
Allison AE 2100D3 and composite blades
Allison AE 2100D3 and composite blades

I learnt a lot and saw two types of aircraft I hadn’t seen before. The weather was quite grey and so the photos are a bit of a washout, I don’t do Photoshop. The low cloud base did mean that the aircraft would take off and about fifteen seconds later they would climb through the cloud.

Lego 46 Model 42055

Now, the final communication. Here’s the bucket wheel working:

Here’s the machine turning the bucket arm:

Moving forward:

And general operation:

Overall this was great fun and very relaxing. Hour for hour entertainment it was about the same as watching an IMAX film.

Lego 46 Model 42055 Part 10

This is the final push. The operators cab and safety railings is built. Along with adding lights and ladders this now completes the Bucket Wheel Excavator.

Model Complete!
Model Complete!

This was probably another hour and a half so total build time is roughly 11 hours. I would argue it was worth every penny.

Some detail photos for you now:

Operator's Cab
Operator’s Cab
Buckets
Buckets
Power Unit and Gear Box
Power Unit and Gear Box
Ready To Dig
Ready To Dig

Lego 46 Model 42055 Part 9

This part of the Bucket Wheel Excavator is to build the power section. This includes a motor, battery pack and the gearing system to turn on and off different drives.

Motor Unit and Gear Box
Motor Unit and Gear Box

This was another hour after a few mistakes were made! Then I had to connect it to the main bucket wheel arm.

Bucket Wheel Arm
Bucket Wheel Arm

A top view:

Bucket Wheel Arm with Motor and Gear Box
Bucket Wheel Arm with Motor and Gear Box

Then this arm had to be connected to the main body.

Initial Mating
Initial Mating

Then the bucket arm was secured and the top superstructure was built.

Top Superstructure Now Included
Top Superstructure Now Included

Current total time: 9 hr 15 mins

Lego 46 Model 42055 Part 8

The next section of this mammoth build was the conveyor away from the bucket wheel.

Conveyor
Conveyor

This was another hour. So current total time is 8 hr 15 min.

Reverse View
Reverse View

And, one more for luck.

Reverse Bucket Wheel
Reverse Bucket Wheel

Carbon Footprint

I recently ordered a day-sack cover from a company using Amazon. It arrived and I was somewhat shocked.

Packaging!
Packaging!

The rest of the box had that paper-stuff in it to hold the rain cover in place. I have written about this before in this communication.

While this sort of packaging excess does seem a waste I’ve got some other ideas. Fuel use for transporting goods is largely dependent on the mass of the object. So although the box added something to the mass it was still reasonably light and so not a huge carbon drain. If the box is recycled then it doesn’t really matter about how much cardboard there was. There’s probably more carbon used in making the plastic wrapper of the item than in the box, as long as the box comes from a sustainable source.

So, upon reflection this excessive packaging may not be as bad a first thought.

I do think that eventually everything will be labelled with a “carbon factor” to make people aware of just how much carbon they emit and how well we are fucking the planet. Because we are. It is fucked. Utterly fucked. I am glad I will be dead in one hundred years. There are going to be wars over water, food and power. I am just very sorry that my children, or potential grandchildren, will be involved in that and the people to blame will all be dead. My parents’ generation and mine have screwed this planet over.

I could be calmed, I guess, by fluffy cat or dog pictures. But they don’t distract me from the bullshit. They reinforce our collective ability to ignore all that is going on.

Lego 46 Model 42055 Part 7

This latest in the occasional series of the Bucket Wheel Excavator build chronicles my building of the bucket wheel arm, although only the first half. This took about an hour and an half so the total time so far is 7 hours 15, I think. I did make a mistake on this one, I put the buckets on facing the wrong way and was too tired to work out if it mattered and so I wasted about ten minutes refitting them correctly.

Bucket Wheel
Bucket Wheel

Another view, showing more of the mechanism.

Bucket Wheel
Bucket Wheel

Now, for completeness of record, here is a view of my working space:

Lego Workspace
Lego Workspace

And the reverse view:

More Workspace
More Workspace

Life

I took a break from building the Lego monster to visit Rochester cinema and watch the film Life. I rated this film on IMDB and you can see a guide to my ratings within this communication.

I spent a lot of this film wondering what to write. I’m still not sure. One of the ways I interact with films is to consider what I write here. It allows me to collect my thoughts and experience the film as something more than just a cinema trip. I am nearly at the point when I am going to take a pad and pen into a film to note down my thoughts as the film rolls. What is written here is normally a collection of illiterate thoughts after the fact. My musings are filtered through the cold process of entropy increasing. Occasionally I add an extra thought here or there when I realise I’ve missed an important point I wanted to make, hence a note pad would be a good idea. I don’t want to write notes on my phone because that’s likely to get me kicked out or would, at the very least, be quite anti-social in the darkened environment of the cinema.

You know what? I’m still not sure what to write. There are some science issues and orbital mechanics things that annoyed me a little but I don’t think they spoiled the film for me. Overall it was quite a good watch. This was essentially Alien but on the International Space Station. It wasn’t really as suspenseful as Alien, but then I do love Alien and Aliens. I did find this ultimately quite not-frightening.

Right [collects thoughts]. This film was fine. I like space stuff and this film had space stuff. Yep, that’s it. Fine.

Now, some bits a pieces with potential SPOILERS.

The ISS had to “catch” the mars probe? Not going to happen.

The life form was very aggressive, I don’t think this type of life form could exists on a planet. It would have to compete for food and resources and it would use them all very soon. Oh, shit, like humans on Earth. Wow! perhaps I missed that metaphor.

The Martian soil didn’t float about.

They found a single microscopic cell out of all the junk they brought in from the probe.

The Soyuz launched to boost the ISS to “deep space” would not have enough fuel. The film mentioned “deep space” a few times as though it’s easy to get there. It’s not. The energy required is immense. We have never, so far, sent a human to deep space. We haven’t even sent a human out of the Earth’s gravity well. We have sent some probes out beyond Earth’s grip but nothing that could sustain human life. I guess the film was set in the future so maybe they can have that one.

The Soyuz docked at a closing velocity that would have destroyed both machines.

There are probably other issues but I don’t want to come across as petty or pedantic. I am both. This film was largely: fine.

Lego 46 Model 42055 Part 6

This next section of the bucket wheel excavator is the main conveyor belt from the body to the truck. This was about an hour to build. So far total build time is 5.75 hours. I think I’m over half way now.

Bottom Conveyor
Bottom Conveyor

I was really tempted to start the bucket wheel part of this but it was feeling late in the evening!

Bottom Conveyor
Bottom Conveyor

I think I’ll be sad once this has been finished. It really is quite therapeutic building this stuff.

Hopper and conveyor
Hopper and conveyor

Lego 49 Model 6346

This one marks a change as this is a model I bought from EBay from a charity. All money to good causes then. While I didn’t have all the pieces in this kit there was enough to make the orbiter.

Orbiter
Orbiter

And a view with the cargo doors / radiators shut:

Doors Shut
Doors Shut

This kit was released in 1993. It amazes me how basic it seems to be!

Lego 46 Model 42055 Part 5

Now I have a working base unit for the Bucket Wheel Excavator it’s time to make the rotating base which serves as the connector for the conveyors and bucket wheel arm. This build took two hours. I had only really budgeted about ninety minutes of time and so I was feeling quite tired towards the end, but the result is gorgeous.

Base Superstructure
Base Superstructure

Here’s some detail of the build.

Cogs 'n' Stuff
Cogs ‘n’ Stuff

I’m about a third of the way through the instructions and not quite halfway through the separate bags!

Here’s the conveyor superstructure part way through the build:

Conveyor Super Structure
Conveyor Super Structure

This is the initial joining of the pieces but with more work still to do:

Nearly There
Nearly There

Another of the completed sections so far:

Getting There
Getting There

Lego 46 Model 42055 Part 3

This Lego model is being constructed in sections. These communications are in line with the numbered bags of legos in the kit. The first part of the kit was to make the dumper truck covered here, this took about an hour.

Here is my workspace:

Work Space
Work Space

I use pasta bowls to hold the pieces while I work. This saves them from dropping into the fireplace or bouncing under furniture on the floor.

This was the first main part of this part of the build:

Central Chassis
Central Chassis

More of the framework:

Open Square?
Open Square?

And this is the final part of this build. This section is the base unit with driver gears for the caterpillar tracks.

Caterpillar Chassis Completed
Caterpillar Chassis Completed

This took about an hour. So far, total time is two hours.

Lego 48 Model 75169

Another in this mni-Lego season. Here we have Qui-Gon fighting Darth Maul in the Naboo power station (?). Obi-Wan awaits to avenge what is about to happen!

Duel On Naboo
Duel On Naboo

You are being spoilt these days as we have another gallery for you!