After my return from a trip to the Lake District, to be chronicled here at some point, I powered up the house. There’s quite a bit to do with IoT lights, Google Home, wireless speakers and the NAS Drive.
The NAS drive is where I have stored all my music, movies and photos for just over six years. I’ve replaced the hard disk drives once but never really thought I’d have a problem with it. So, I powered it up and went and did some stuff. When I got back to the black box I noticed there was no power light on. I checked the lead and socket power. It was all on. I pressed buttons but nothing. I then tried taking out the power lead from the box to then plug it back in. This was the second sign of trouble.
The power cable didn’t really want to leave the black box. When, after some good tugging, I got the lead out there followed a small spark, some smoke and general bad things that happen to electrical goods. Bugger.
After a quick check to see that it was definitely dead I panicked about getting the data off the HDDs. So, I ordered a USB Sata connection to join the drive to the PC. This seemed reasonable. When finally connected the PC didn’t want to read the HDD drive the drive was formatted in Linux and also had a RAID configuration. I was now starting to feel sick. The most recent photos are backed up in the cloud. But I have loads which are only on the NAS Drive. I thought I was protected because the HDD were in RAID1 configuration so the data should have been backed up in case of HDD failure.
More importantly I think was that my entire music library, along with the 100s of hours of organising it, was on the NAS. This has been a labour of love and the SONOS system uses the NAS as the music library along with iTunes [which I hate passionately].
The whole point of the RAID configuration was to make sure my data was safe. I hadn’t really considered the black box was going to be my downfall. It has died.
So, I now have some data recovery software and it has found 250GB of data but the file names are gone. I have those files transferred to the PC at the moment but my main hope is that I win a NAS enclosure the same as the one I did have. I will use this to get the data from the HDD assuming I can just plug the drives into the enclosure and it will be happy to let me read the data from them.
Reading online there are people who keep three or four copies of their data. This is something I am going to do in the future. I will have copies in the following locations:
- PC
- NAS Drive
- Large capacity USB
- Cloud
This will take a little organising but seeing as I was only at around half a terabyte on the old NAS I think I’ll be ok for a while. One of the disks I have taken out the old enclosure will be fitted into the PC and be used as the PC backup disk. I will use a USB stick plugged into the NAS to back that up and I will generally transfer stuff to the cloud as often as possible. I am currently a little sad about it all and I’m hoping that in a week’s time I’ll be fixed, up and running and generally a lot more cheery. There will be updates.
