"Nothing but the rain"
This part of the Bucket Wheel Excavator is to build the power section. This includes a motor, battery pack and the gearing system to turn on and off different drives.
This was another hour after a few mistakes were made! Then I had to connect it to the main bucket wheel arm.
A top view:
Then this arm had to be connected to the main body.
Then the bucket arm was secured and the top superstructure was built.
Current total time: 9 hr 15 mins
The next section of this mammoth build was the conveyor away from the bucket wheel.
This was another hour. So current total time is 8 hr 15 min.
And, one more for luck.
I recently ordered a day-sack cover from a company using Amazon. It arrived and I was somewhat shocked.
The rest of the box had that paper-stuff in it to hold the rain cover in place. I have written about this before in this communication.
While this sort of packaging excess does seem a waste I’ve got some other ideas. Fuel use for transporting goods is largely dependent on the mass of the object. So although the box added something to the mass it was still reasonably light and so not a huge carbon drain. If the box is recycled then it doesn’t really matter about how much cardboard there was. There’s probably more carbon used in making the plastic wrapper of the item than in the box, as long as the box comes from a sustainable source.
So, upon reflection this excessive packaging may not be as bad a first thought.
I do think that eventually everything will be labelled with a “carbon factor” to make people aware of just how much carbon they emit and how well we are fucking the planet. Because we are. It is fucked. Utterly fucked. I am glad I will be dead in one hundred years. There are going to be wars over water, food and power. I am just very sorry that my children, or potential grandchildren, will be involved in that and the people to blame will all be dead. My parents’ generation and mine have screwed this planet over.
I could be calmed, I guess, by fluffy cat or dog pictures. But they don’t distract me from the bullshit. They reinforce our collective ability to ignore all that is going on.
This latest in the occasional series of the Bucket Wheel Excavator build chronicles my building of the bucket wheel arm, although only the first half. This took about an hour and an half so the total time so far is 7 hours 15, I think. I did make a mistake on this one, I put the buckets on facing the wrong way and was too tired to work out if it mattered and so I wasted about ten minutes refitting them correctly.
Another view, showing more of the mechanism.
Now, for completeness of record, here is a view of my working space:
And the reverse view:
This next section of the bucket wheel excavator is the main conveyor belt from the body to the truck. This was about an hour to build. So far total build time is 5.75 hours. I think I’m over half way now.
I was really tempted to start the bucket wheel part of this but it was feeling late in the evening!
I think I’ll be sad once this has been finished. It really is quite therapeutic building this stuff.
This one marks a change as this is a model I bought from EBay from a charity. All money to good causes then. While I didn’t have all the pieces in this kit there was enough to make the orbiter.
And a view with the cargo doors / radiators shut:
This kit was released in 1993. It amazes me how basic it seems to be!
Now I have a working base unit for the Bucket Wheel Excavator it’s time to make the rotating base which serves as the connector for the conveyors and bucket wheel arm. This build took two hours. I had only really budgeted about ninety minutes of time and so I was feeling quite tired towards the end, but the result is gorgeous.
Here’s some detail of the build.
I’m about a third of the way through the instructions and not quite halfway through the separate bags!
Here’s the conveyor superstructure part way through the build:
This is the initial joining of the pieces but with more work still to do:
Another of the completed sections so far:
Caterpillar time! The big boy needs wheels (or similar). Build time for these was about an 45 minutes for both.
And here are the caterpillars attached to the base chassis.
This Lego model is being constructed in sections. These communications are in line with the numbered bags of legos in the kit. The first part of the kit was to make the dumper truck covered here, this took about an hour.
Here is my workspace:
I use pasta bowls to hold the pieces while I work. This saves them from dropping into the fireplace or bouncing under furniture on the floor.
This was the first main part of this part of the build:
More of the framework:
And this is the final part of this build. This section is the base unit with driver gears for the caterpillar tracks.
This took about an hour. So far, total time is two hours.
Another in this mni-Lego season. Here we have Qui-Gon fighting Darth Maul in the Naboo power station (?). Obi-Wan awaits to avenge what is about to happen!
You are being spoilt these days as we have another gallery for you!
